Game Controllers Bluetooth Wireless Gamepad For Nintendo Switch

รายละเอียดสินค้า

Technical Specification:
Sleep current: 30-100uA
Vibration current: 80-130mA
Battery voltage/capacity: 3.7V/500mAh
Battery: lasts about 4-5 hours (full charge)
Charging time: 2-3 hours

Package Includes:
1* wireless Controller
1* Charging Cable
1* User manual

operation instructions

1. connection
#1. Switch mode:
Press Home and hold it down for 3 seconds, flashing slowly for about 5 seconds, then fast flashing and enter the Bluetooth search mode.
Synchronization status, or pairing with the host: LED1-LED4 flash quickly, the channel indicator corresponding to a successful connection is always on;
Note: it will automatically sleep if it fails to synchronize successfully within 2 minutes.

#2. Android mode:
press and hold the "Y" + "HOME"" key combination for 3 seconds to turn the gamepad on.
The indicator LED1 flashes quickly, and LED1 is always on after the pairing is successful

2. Reconnect
Press the HOME for 3 seconds and automatically connect to the paired host after waking up,
and automatically sleep if the connection fails within 20 seconds;
(SWICTH mode: cycle slow flashing; Android mode: single LED flashing)

3. Charging
LED1-LED4 will flash slowly when charging, and the LED will be off when it is full;
Low battery voltage alarm: the current channel indicator flashes (fast flashing) when Bluetooth is connected;
When charging with a USB cable, the current channel indicator does not flash (always on), but the LED4 indicator flashes, and the LED4 indicator is off when it is fully charged;

4. Automatic sleep
#1. The host screen is turned off;
#2. Bluetooth mode, press the HOME button for 5 seconds to disconnect from the host.
If no operating within 5 minutes, it will automatically sleep

5. Low voltage alarm
lithium battery voltage is lower than 3.55V±0.1V, the current channel light will flash quickly to indicate;
lithium battery voltage is lower than 3.45V±0.1V, it will automatically sleep.

6. USB function: support 4 platforms
Operation method:
#1 Plug in SWITCH The host automatically recognizes as SWITCH, and the host assigns lights;
#2 Plug the PC into the default XINPUT mode; LED3 is always on
#3 In XINPUT mode, long press the VIB key
#4 When the handle is off, press and hold the "L1" key
Can switch to Dinput mode in 2 seconds, LED2 is on
Then plug in the USB to the PS3 host, for PS3 mode, the host assigns indicator lights

PC-USB upgrade: press L3 in the off state and then insert the PC-USB to enter the upgrade state, open the upgrade software and follow the operation steps to upgrade the handle software.

7. Turbo speed:
Speed ​​is divided into 8Hz, 12Hz, 15Hz; the default is 12Hz;
speed increase: Turbo + cross key Up;
speed reduction: Turbo + cross key Down

8. In the SWITCH online mode, you can press and hold the four keys R, L, ZR, ZL at the same time to schedule the motor strength
three gears: strong, medium and weak.

ข้อมูลจำเพาะของสินค้าเบื้องต้น

Game Controllers Bluetooth Wireless Gamepad For Nintendo Switch ได้รับความนิยมในกลุ่มผู้ใช้อุปกรณ์เสริมเกม มีผู้ซื้อสินค้านี้ไปแล้วกว่า 10 ชิ้น และหนึ่งในผู้ซื้อ Game Controllers Bluetooth Wireless Gamepad For Nintendo Switch อาจเป็นผู้ที่กดถูกใจสินค้าใน 22 ครั้ง ถึงแม้ว่าสินค้านี้จะได้รับความนิยมในผู้ใช้อุปกรณ์เสริมเกม แต่ก่อนการตัดสินใจซื้อสินค้า Game Controllers Bluetooth Wireless Gamepad For Nintendo Switch คุณก็ควรตรวจสอบเงื่อนไข รูปภาพสินค้า รีวิว และรายละเอียดอื่น ๆ ให้ครบถ้วนอีกครั้ง และเพื่อสิทธิประโยชน์ของคุณในการสั่งซื้อสินค้า กรุณาตรวจสอบโปรโมชั่น โค้ดส่วนลดต่างๆ ที่ผู้ขายมอบให้ก่อนการสั่งซื้อสินค้าในช่องทางช้อปปี้